Tag Archives: vertical cutting dryer

Presentation of Brightway Drilling Waste Management

I have a plan to do the presentation of Brightway Drilling Waste Management by the end of Jan, 2016.

drilling waste management

drilling waste management

It is an interesting challenge. It might be an good idea to track down my preparation with the following blog.

Before going deeper about the drilling waste management content, I have a question in my mind how to do the presentation effectively, based on my limited experience of presentation, it is not a easy thing to grasp customer attention to our product presentation.

I found Steve Jobs Presentation Skills Video from Youku luckily, and if you want to learn sth, better to kind a good teacher.

1. Set the theme, and make your them clear and consistent
2. Create a headline that sets the direction for your meeting.
3. Provide a outline, verbally open and close each section with clear transition and make it easy for your listeners to follow your story.
4. Demonstrate enthusiasm
Extraordinary, amazing, cool, wow your audience,and if you are not passion about it, the audiences are not going to be.
5. Make numbers and statistics meaningful and analogies help connect the dos for your audience.
6. Make it simple and paint a simple picture that doesn’t overwhelm
7. Make a show, rehearse
Now the below is my current outline for the presentation of drilling waste management solids control system.

1.1 Brightway Main Product

1.2 Brightway Solids Control System Application

1.3 Brightway Equipment Separation Process

1.4 Brightway Processing Equipment

1.5 Brightway Quality Control

1.6 Brightway Qualification

1.7 Brightway Market

  1. Brightway Drilling Waste Management

2.1 Composition

2.2 Overall Layout of Brightway Drilling Waste Management System

2.3  Flowchart

2.4  Modular Equipment

2.4.1  Drying Shaker

2.4.2  Vertical Cutting Dryer

2.4.3  Decanter Centrifuge

2.4.4 Vertical Cutting Dryer and Decanter Centrifuge On The Same Skid

2.4.5 Drilling waste conveyor system

2.4.6  Auxiliary Component (Screw Pump, Centrifugal pump, Mud Agitator, Tank etc)

2.4.7 More Designs

  1. Brightway Drilling Waste Management Cases
  2. Brightway Commissioning On Customer Site
  3. Brightway Activity
  4. 6. Brightway Drilling Waste Management-Questionare Survey

Compared with Steve Job skills, there are some parts need to be revised, and the target of presentation is not only to convey the information but also to persuading the audience to accept the products and the lecturer.

vertical cutting dryer

Vertical cutting dryer is one amongst the foremost necessary drilling waste management instrumentality. it’s the organized within the solid section dominant system of drilling fluids. Brightway solids management has skilled mud desanders, field desilters and carafe centrifuges for oil & gas drilling corporations.

Vertical Cutting Dryer

Vertical Cutting Dryer

What parts frame a vertical cutting dryer? it’s a flow-in pipe and overflow pipe, symmetrically structured for each ends to produce installation with convenience. With the overflow pipe for following stage, mud desilter ends up in the opposite lubricant tank by associate degree 8″ rubber hose. The suspension exit of the sand pump and also the flow-in pipe of mud desander area unit connected with a rubber hose. it’s necessary to envision the angle. underneath the perfect operating condition, the running angle at very cheap ought to be 20°~30°. to boot, drilling fluids desander ought to be cleansed fully, and dirt desilters in addition. it’s vital to try to to thus once the suspension has serious consistency to be processed.

mud solids control equipment

mud solids control equipment

Brightway Vertical cutting dryer is intended per principle of grain settlement and also the lubricant rotationally enters on the inner wall of the hydrocyclone through pressure and rate generated by a sand pump to atiny low extent. The thicker granules will go down in spiral mode on the inner wall of hydrocyclones underneath force and gravity in order that lubricator discharged from very cheap exit. The discharged granules area unit separated on the close-mesh sieve, with the remainder of the medium growing in a very spiral mode through the hydrocyclones to enter into the third separating plant from the overflow mouth for any clearance. The drilling solids control looks to be straightforward, truly it’s skilled and sophisticated.

Vertical cutting dryer

Vertical cutting dryer is one amongst the foremost necessary drilling waste management instrumentality. it’s the organized within the solid section dominant system of drilling fluids. Brightway solids management has skilled mud desanders, field desilters and carafe centrifuges for oil & gas drilling corporations.

Vertical Cutting Dryer

Vertical Cutting Dryer

Vertical cutting dryer
What parts frame a vertical cutting dryer? it’s a flow-in pipe and overflow pipe, symmetrically structured for each ends to produce installation with convenience. With the overflow pipe for following stage, mud desilter ends up in the opposite lubricant tank by associate degree 8″ rubber hose. The suspension exit of the sand pump and also the flow-in pipe of mud desander area unit connected with a rubber hose. it’s necessary to envision the angle. underneath the perfect operating condition, the running angle at very cheap ought to be 20°~30°. to boot, drilling fluids desander ought to be cleansed fully, and dirt desilters in addition. it’s vital to try to to thus once the suspension has serious consistency to be processed.

Brightway Vertical cutting dryer is intended per principle of grain settlement and also the lubricant rotationally enters on the inner wall of the hydrocyclone through pressure and rate generated by a sand pump to atiny low extent. The thicker granules will go down in spiral mode on the inner wall of hydrocyclones underneath force and gravity in order that lubricator discharged from very cheap exit. The discharged granules area unit separated on the close-mesh sieve, with the remainder of the medium growing in a very spiral mode through the hydrocyclones to enter into the third separating plant from the overflow mouth for any clearance. The drilling fluids solids management looks to be straightforward, truly it’s skilled and sophisticated.

Solid waste management disposal methods

Vertical Cuttings drier is functioned indoor of solid waste management disposal strategies.

Based on the analysis of the wind speed field uniformity in drying chamber, on give theoretical basis for analysis and development of enormous vertical cuttings drier. in the main through uniform wind board square measure put in in intakes and alter material surface roughness activity wind speed worth in drying chamber, analysis and wind plate and also the material surface effects on medium speed uniformity.Results show that the vertical drier into the wind and also the wind plate is put in within,

on either side will clearly improve the medium into the drying chamber and thru the dry material of medium air rate uniformity, compared with while not uniform wind board, set the short well when the wind plate of 360 metric linear unit, medium into the drying chamber a and b duct water rate uniformity of reduced by seventy three.67% and variation constant of seventy three.67% to 22.27% and 29.36%, medium speed among the scope of the drying chamber plane through the fabric uniformity constant of variation of the reduced from forty.3% to 40.3%.

Vertical Cutting Dryer

Vertical Cutting Dryer

Material surface roughness have an effect on dry indoor wind field. Drying space space is giant vertical drier giant, and adopts the profile into the wind, the uniformity of dry indoor air rate field of medium is one in every of the necessary factors that result on} the drying effect.

Multilayer belt drier, the spray chamber through drier of the drier dry indoor the uniformity of temperature field and rate field and its influence on the impact of drying on the fabric for variety of analysis, found the drier drying chamber is uneven distribution of wind speed and cause low potency of drying, drying of the most causes of uneven.

Therefore, the study on the massive vertical drier dry indoor rate field, particularly the uniformity of wind field looks necessary.

 

oilfield vertical cutting dryer

Vertical cutting dryer is one amongst the foremost necessary drilling waste management instrumentality. it’s the organized within the solid section dominant system of drilling fluids. Brightway solids management has skilled mud desanders, field desilters and carafe centrifuges for oil & gas drilling corporations.

Vertical cutting dryer

Vertical cutting dryer

What parts frame a vertical cutting dryer? it’s a flow-in pipe and overflow pipe, symmetrically structured for each ends to produce installation with convenience. With the overflow pipe for following stage, mud desilter ends up in the opposite lubricant tank by associate degree 8″ rubber hose. The suspension exit of the sand pump and also the flow-in pipe of mud desander area unit connected with a rubber hose. it’s necessary to envision the angle. underneath the perfect operating condition, the running angle at very cheap ought to be 20°~30°. to boot, drilling fluids desander ought to be cleansed fully, and dirt desilters in addition. it’s vital to try to to thus once the suspension has serious consistency to be processed.

Brightway Vertical cutting dryer is intended per principle of grain settlement and also the lubricant rotationally enters on the inner wall of the hydrocyclone through pressure and rate generated by a sand pump to atiny low extent. The thicker granules will go down in spiral mode on the inner wall of hydrocyclones underneath force and gravity in order that lubricator discharged from very cheap exit. The discharged granules area unit separated on the close-mesh sieve, with the remainder of the medium growing in a very spiral mode through the hydrocyclones to enter into the third separating plant from the overflow mouth for any clearance. The drilling fluids solids management looks to be straightforward, truly it’s skilled and sophisticated.