Vacuum degasser is our factory based on the comprehensive domestic and foreign various degasser developed a new special equipment for processing gas immersion fluid. Which is applicable to all types of mud purification system supporting, for the viscosity performance and recovery the proportion of mud, stable slurry, reduce drilling cost, has a very important role. At the same time, and also can serve as an mud agitator with high power.
The degasser is an vacuum degasser which is the use the suction of vacuum pump,produce a negative pressure zone in the vacuum tank, mud under atmosphere, through a hollow shaft suction tube enter into the rotor,and then through the hollow shaft around the window, a spray thrown to the tank wall, due to the collision and separation wheel effects,which make the drilling liquid separated into a thin layer, the bubble immersed in the mud is break up, gas discharged through suction of the vacuum pump and the mud gas separator separation effects, gas from the separator exhaust pipe discharge into safe areas, mud is discharged from the impeller tank. Because of the opening of the main motor, rotating impeller motor connected with mud in a high-speed condition. Therefore,mud only can from the suction tube enter into the tank, and not be sucked from the drainage tube